Why Use Thermal Spray Metallisation? Key Advantages of This Technology
17 November 2026

Thermal spray metallisation, also known as thermal spraying, is an advanced surface engineering technology that plays an increasingly important role in modern industry. The process involves depositing molten or semi-molten coating material, supplied in wire or powder form, onto a previously prepared substrate surface, creating a durable, adherent and functional protective coating.

Developed since the early 20th century, this technology is now recognised as one of the most effective methods for protecting and refurbishing industrial components operating under extremely demanding conditions. This article provides a detailed overview of the key features and significant advantages of thermal spray metallisation, highlighting its important position in modern surface engineering applications.

Exceptional Corrosion Protection: A Protective Barrier for Steel and Aluminium

One of the primary and most widely recognised advantages of thermal spray metallisation, particularly when using zinc, aluminium or zinc-aluminium alloys (ZnAl), is its ability to provide long-lasting and reliable corrosion protection.

This protection is achieved through a combination of barrier protection and, in suitable coating-substrate systems, cathodic protection. The coating material, such as zinc, has a more negative electrochemical potential than the underlying substrate, such as steel. As a result, when exposed to a corrosive environment, the coating acts as a sacrificial layer, gradually corroding in preference to the base metal and thereby protecting the underlying component from corrosion.

How Thermal Spray Coatings Protect Against Corrosion in Aggressive Environments

Thermally sprayed zinc and aluminium coatings are particularly effective in highly corrosive environments, such as marine environments, chemical processing facilities and areas exposed to high salinity or corrosive gases.

The metallised coating acts not only as a physical barrier, isolating the substrate from the surrounding environment, but can also provide sacrificial cathodic protection. This electrochemical protection mechanism helps prevent corrosion of exposed steel at minor coating defects, such as scratches or surface damage. In the case of zinc coatings, corrosion products may also accumulate within small defects, providing an additional protective effect.

This represents a significant advantage over certain conventional paint coatings, where damage to the protective layer can expose the underlying metal directly to corrosive conditions.

An Ideal Base for Paint Systems

Thermal spray metallisation is frequently used as the first stage of a comprehensive corrosion protection system, commonly known as a duplex coating system.

The porous structure of the thermally sprayed coating, combined with proper substrate preparation through abrasive blasting, provides an excellent surface for the application of subsequent paint layers, primers and sealers, ensuring strong coating adhesion.

These multilayer protective systems provide a synergistic corrosion protection effect, significantly extending the service life of the entire coating system. Under suitable operating conditions and with proper coating selection and application, protection can last for several decades, directly contributing to lower long-term maintenance costs and reduced downtime.

Minimal Size and Temperature Limitations

Unlike immersion-based coating methods, such as hot-dip galvanising, which are restricted by the dimensions of the galvanising bath, thermal spray metallisation has virtually no limitations regarding the size and geometry of the components being protected. This is a key advantage that makes the technology particularly suitable for:

  • Large-Scale Steel Structures: Bridges, overpasses, large storage tanks, telecommunications towers and masts.
  • Components with Complex Geometries: Machine parts, industrial pipelines and steel lattice structures.
  • Existing Structures (On-Site Refurbishment): The ability to apply protective coatings directly at construction sites or operating facilities, eliminating the need for component disassembly and transportation.

Minimal Thermal Impact on the Workpiece

The thermal spray metallisation process is characterised by minimal heat transfer to the substrate. The workpiece temperature generally remains relatively low, typically not exceeding 100–150°C, depending on the spraying method and process parameters. This is a significant advantage, enabling:

  • Protection of Components Susceptible to Thermal Distortion: Thin-walled structures and sheet metal components that could deform when exposed to high temperatures, as is often the case with hot-dip galvanising.
  • Coating of Heat-Sensitive Materials: The ability to apply protective coatings to certain metal alloys and, using specialised techniques such as cold gas spraying (cold spray), even selected plastics and composite materials.
  • Preservation of the Substrate’s Metallurgical Microstructure: The relatively low thermal input helps prevent undesirable changes in the substrate’s crystalline structure, preserving its original mechanical properties and strength characteristics.

Versatility in Functional Applications and Component Refurbishment

Thermal spray metallisation extends far beyond corrosion protection, offering a wide range of functional applications, including the refurbishment and restoration of worn machinery components. The selection of coating materials – from stainless steel, aluminium alloys, bronze and molybdenum to nickel alloys and hard composite materials – enables coating properties to be precisely tailored to specific operating requirements.

Component Refurbishment and Dimensional Restoration

One of the key applications of thermal spraying is the restoration of worn surfaces on machinery components. Thermally sprayed coatings enable the dimensional restoration of parts affected by abrasive wear, erosion, cavitation damage or the loss of their original dimensions. Typical applications include:

  • Shafts and Journals: Restoration of sliding surfaces and bearing seating surfaces.
  • Sleeves and Piston Pump Components: Restoration of nominal dimensions and sealing surfaces.
  • Turbine and Engine Components: Refurbishment of surfaces exposed to high temperatures and abrasive wear.

By applying a new metallic coating of the required thickness, it is possible to extend the service life of critical components, avoid the expense of purchasing costly replacement parts and minimise production downtime.

Improved Wear Resistance and Mechanical Properties

Thermal spray metallisation enables the application of coatings with properties that significantly exceed those of the base material, particularly in terms of:

  • Abrasion Resistance: Hard alloy and cermet coatings (e.g. carbide-based coatings) are widely used in the mining, metallurgical and mechanical engineering industries.
  • High-Temperature Resistance: Ceramic coatings and high-melting-point metallic coatings are essential for applications in the power generation and aerospace industries.
  • Dielectric and Insulating Properties: Specialised coatings provide electrical insulation or thermal barrier protection for component surfaces.

High Coating Quality and Process Control

Modern thermal spray metallisation techniques, such as electric arc spraying, plasma spraying and High-Velocity Oxy-Fuel (HVOF) spraying, provide precise control over process parameters, ensuring high coating quality, consistency and repeatability.

Thermal Spraying Methods and Coating Properties

High-velocity thermal spraying methods, including HVOF (High-Velocity Oxy-Fuel) and HVAF (High-Velocity Air-Fuel), accelerate coating particles to extremely high velocities, giving them exceptionally high kinetic energy. This results in excellent coating adhesion (bond strength) and very low coating porosity, producing dense, high-performance coatings that can approach the theoretical density of the coating material.

Economic and Logistical Benefits

Although thermal spray metallisation requires specialised equipment and technical expertise, it is often one of the most cost-effective methods of surface protection when considering the Total Cost of Ownership (TCO), including long-term operating and maintenance expenses.

Long-Term Reduction in Maintenance Costs

Investing in a high-quality corrosion protection system based on thermal spray metallisation, with a potential service life of 20–50 years depending on coating thickness, environmental conditions and the coating system used, can significantly reduce the frequency of costly maintenance operations, major repairs and component replacements throughout the structure’s service life.

For critical infrastructure, such as bridges and industrial pipelines, reducing the need for repeated repainting every few years can generate substantial logistical and financial savings.

Reduced Processing and Installation Times

The thermal spraying process is relatively fast and efficient, allowing protective coatings to be deposited directly onto prepared surfaces. Following application and any necessary surface preparation, coated components can proceed to subsequent sealing or painting operations with minimal delay.

In the case of on-site component refurbishment, thermal spray metallisation minimises equipment downtime, which is particularly important in industries operating continuous production processes.

In conclusion, thermal spray metallisation is a fundamental technology in modern surface engineering, offering a unique combination of corrosion protection for large and complex structures, restoration of worn machinery components and the ability to enhance surface properties, including mechanical strength, wear resistance and high-temperature performance.

Its versatility, minimal thermal impact on the substrate and proven long-term cost efficiency make thermal spray metallisation a preferred solution for some of the most demanding industrial applications.