Offer

Bearing Assembly Vibration Measurement

Bearing Assembly Vibration Measurement – The Key to Effective Condition Monitoring and Maintenance

The Role of Vibration Analysis in Machinery and Equipment Diagnostics

Vibration is a natural consequence of the operation of industrial machinery and equipment. Vibration analysis, particularly the measurement of vibration in bearing assemblies, is one of the most important diagnostic techniques used in industrial maintenance and condition monitoring. Vibrations measured at bearing assemblies provide valuable information about the technical condition of machinery and its components, especially rolling-element bearings.

Bearing Assembly Vibration Measurement – Fundamentals and Objectives

Vibration measurements are typically performed on bearing end shields or machine housings in three directions: horizontal, vertical and axial. To obtain accurate measurement data, high-precision sensors, such as piezoelectric accelerometers, are used. These measurements enable the detection of abnormal mechanical phenomena, including impacts between loaded rolling elements and bearing raceways, cracks and other forms of bearing damage.

Measurement Systems and Analysis Methods

A measurement system used for bearing condition monitoring combines specialised hardware and diagnostic software. Modern diagnostic instruments acquire and process vibration signals, which can then be analysed in real time. One of the most widely used analysis techniques is the Fast Fourier Transform (FFT), which enables frequency-domain analysis of vibration signals, including the frequency spectrum of an enveloped signal. Envelope analysis allows the identification of frequency components associated with characteristic bearing defect frequencies, facilitating the early detection of faults in bearing components.

Vibration Parameters and Bearing Condition Assessment

Typical parameters used in vibration diagnostics include:

  • Root Mean Square (RMS) value – indicates the overall vibration level and is related to vibration energy,
  • peak value – helps identify mechanical impacts and transient vibration events,
  • peak-to-RMS ratio – known as the crest factor,
  • frequency – analysed over a range extending from a few Hz up to 32 kHz.

Broadband vibration levels and vibration acceleration measurements provide essential data for assessing the condition of rolling-element bearings and detecting when vibration levels exceed permissible limits.

Vibration Diagnostics – Periodic or Continuous Monitoring?

Vibration measurements can be performed periodically using portable diagnostic instruments or continuously through integrated condition monitoring systems. Continuous machinery condition monitoring enables earlier detection of deterioration in bearing assemblies, more accurate assessment of their operating condition and effective prevention of unexpected equipment failures.

Specialised Diagnostic Methods – Shock Pulse Method (SPM)

The Shock Pulse Method (SPM) is an advanced bearing condition monitoring technique based on the analysis of high-frequency shock pulses generated by contact between rolling elements and bearing raceways. The signals analysed using this method contain frequency components associated with characteristic bearing defect frequencies, enabling early detection of bearing damage and assessment of lubrication conditions.

The Importance of Condition Monitoring and External Diagnostic Services

Regular monitoring of machinery vibration characteristics and accurate assessment of bearing condition should form an integral part of the maintenance strategy in every industrial facility. Vibration measurements performed by specialised external service providers or using in-house diagnostic systems significantly improve the safety, reliability and operational performance of industrial machinery and equipment.

Trust Our Experts

Bearing assembly vibration measurement is an essential tool in modern industrial condition monitoring and predictive maintenance. Proper application of diagnostic techniques such as envelope analysis, Fast Fourier Transform (FFT) and Shock Pulse Method (SPM), supported by high-precision sensors and advanced measurement systems, provides reliable data on bearing condition, enables early prediction of potential failures and helps optimise maintenance processes. As a result, industrial facilities can achieve greater operational efficiency, improved equipment safety and reduced maintenance costs.